ARISS in your path will work just fine for ISS and PCSAT2. It should work for PCSAT when it is fully operational but W3ADO-1 is required when PCSAT is not fully restored. Take a look at http://www.findu.com/cgi-bin/pcsat.cgi under the recent activity text section and see if the beacon callsign is indicating W3ADO-1. If so, use that.
I use the same equipment you have and can make it but sometimes the ISS structure does block PCSAT2 since it is mounted near the large solar array. Take a bit of effort (persistence) at times but the beam helps.
Kenneth - N5VHO
________________________________
From: amsat-bb-bounces@amsat.org on behalf of Armour, Randy (ITS) Sent: Sat 9/9/2006 4:55 PM To: amsat-bb@amsat.org Subject: [amsat-bb] APRS on ISS, PCSAT, and PCSAT2
I will apologize in advance as this question has probably been asked several times already. I am attempting to digi-peat through PCSAT, and PCSAT2 with an Arrow handheld and Kenwood D7A. Having no trouble using APRS on the ISS, I hope to be able to do the same with PCSAT and maybe even get through PCSAT2 before decommission.
I can decode packets from PCSAT and PCSAT2, but never get a packet through either system. PCSAT had a 90 degree pass this morning, with no luck. I am suspicious that my packet path is incorrect, or I don't have enough power to reach the receivers.
Packet path is ARISS,APRSAT,SGATE,WIDE. I was recently told that only ARISS was needed for PCSAT, PCSAT2, and ISS. Having no luck yet and time growing short for PCSAT2, I am hoping to get a definitive answer from the list. What is the correct packet path? Can I make it with such limited equipment as a handheld beam and 6 watt HT?
Thanks in advance,
Randy - KI4LMR
_______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb