Upgrade to UniTrac 2003 get the Full package and the Latest Upgrade - then download the "Getting Started Guide"
73's
Don Woodward KD4APP
-----Original Message----- From: amsat-bb-bounces@amsat.org [mailto:amsat-bb-bounces@amsat.org] On Behalf Of wolthui3@msu.edu Sent: Sunday, November 15, 2009 14:23 To: amsat-bb@amsat.org Subject: [amsat-bb] Help unit_trac2000 + WinXP
I have searched and searched to get this working, but I can not. I bought used a Uni_trac 2000 silver case. I have the latest software loaded on my WinXP Nova sat tracking computer. I have the original cable for the Yaesu g5500. I have confirmed all the pin outs. I am stuck on the calibration portion of the install instructions. I have installed the port95nt.exe as stated in the instructions.
The software runs and appears to be talking to the UniTrac2000 on LPT1. It has the yellow LED flashing constantly (like it is geting data). If I pull the power and replug it in then it goes solid yellow until I hit Hardware Reset in the unitrac software. So I am sure it is talking.
I double click on Calibrate like the instructions say. I see the Green 0's and it says to use the manual buttons to fully exectue rotation of up and right. I do this, but the numbers do not change. I see it says to adjust the voltage pots, but that doesn't do me any good.
Anyone help?
Mike kb8zgl _______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.707 / Virus Database: 270.14.59/2494 - Release Date: 11/15/09 02:50:00