Hi Mike, yes will definitely have a look at the K3NG software as well. Great feedback from all of you. Thanks yr advice. Keeping you posted. 73 Albert PD0OXW
Sent from my android device.
-----Original Message----- From: Mike Sprenger mikesprenger@gmail.com To: "Franklyn A. Ballentine, Jr" art.ballentine@gmail.com Cc: Mvivona Mvivona@yahoo.com, Albert van Deursen avdeur@home.nl, amsat-bb@amsat.org Sent: Fri, 10 Jun 2016 21:42 Subject: Re: [amsat-bb] Question wrt Arduino and Satellite tracking
I have built a 4 arduinos each with the K3ng code running G5400 rotors.
Add 4 transistors and a few resistors and life is good.
2 line LCD is nice but can be omitted by querying the com port to calibrate.
They work Great !
Thanks, Mike
Sent from my iPhone
On Jun 10, 2016, at 2:28 AM, Franklyn A. Ballentine, Jr art.ballentine@gmail.com wrote:
Please let me know how you make out. I'm in the same spot with a Yaesu G5400B. I'm trying the K3NG route and using M0UPU's board (the EAGLE CAD files are on his site and I just submitted them to OSH Park for creation) Everyone here has been really helpful and I'm sure you'll be able to come up with a solution.
73 Frank kb1qzh
On Thu, Jun 9, 2016 at 8:36 PM Mvivona via AMSAT-BB amsat-bb@amsat.org wrote:
Albert, That is my YouTube video you listed there. In my video, I walk the viewer through the steps to make HRD control the Arduino. It works great. Everything I have is listed in the comments section of the video.
Michael/KC4ZVA
On Jun 9, 2016, at 3:52 PM, Albert van Deursen avdeur@home.nl wrote:
Hi, Just a quick question on Arduino and Satellite tracking. Was looking for an easy setup to demonstrate Amateur Satellite tracking using HRD (EasycommII for driving the rotator) ) via an Arduino Board for our HAM Club I came across an interesting program written by K9VUG (https://sites.google.com/site/k6vugdiary/home/satellite-tracking-system) and demonstrated on YouTube https://youtu.be/00SW1ExS2es. Unable to contact the author or other kind of feedback from the net I was wondering if any of you out there ever tried this setup. Any advice would be welcomed. 73 Albert PD0OXW
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb