Hi Mike,
I like building the controllers that you can build on an Arduino.
K3NG has provided the software, works great. I am not a software developer, but I found it quite reasonable to review and adjust the settings in the source code as appropriate for my station then compile and load into the Arduino.
Wire it up per this article and works great: (Mine is set to emulate the Yaesu GS232)
https://blog.radioartisan.com/yaesu-rotator-computer-serial-interface/ https://github.com/k3ng/k3ng_rotator_controller
Works great. ....The next one I build will be to rotate my HF Beam atop the Yaesu G800.
Thanks, Mike W4UOO
On Fri, Sep 6, 2019 at 6:30 PM Mike Seguin via AMSAT-BB amsat-bb@amsat.org wrote:
What are folks using now to control a G5400B rotor system with SatPC32?
I have my trusty SatTracker 688 from WA8SME, but that is no longer available.
--
73, Mike, N1JEZ "A closed mouth gathers no feet" _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb