I am not a constant user of the sats, but I notice this with both some CW and SSB transmissions.
Some sats just have drift.
It is still fun.
God Bless
R W4BUE
----- Original Message ----- From: "Clayton Coleman" kayakfishtx@gmail.com To: "AMSAT-BB" amsat-bb@amsat.org Sent: Friday, February 07, 2014 11:42 AM Subject: [amsat-bb] Listening on USB when operating CW
I assume many home station satellite operators utilize some kind of full-duplex radio or combination of two radios for CW on the current satellites.
Lately, as I have been listening a lot more with my FUNcube Dongle Pro+, I have observed many CW stations drifting across the satellites' passband. I realize this is not a new phenomenon. I would assume these drifting stations are NOT using any type of computer Doppler correction. If they were using computer control, I would assume their CW would stay on the same place in the transponder's passband. It is visually apparent when the stations manually make larger frequency movements because of the curve displayed on my SDR application's waterfall display.
Many times I have been engaged in a QSO only to have someone CQ'ing on CW drift across my existing QSO. Anyone who operates satellites has probably had this happen to them many times. Sometimes myself or others in QSO may try to tell the CW operator "Hello - QSO in progress" but it is apparent they are not hearing us.
My question is, does it make sense for people using CW on the satellites to have their receiver set to USB? Do some operators do this? If listening on a VFO with USB and had your transmit VFO set to CW, would this help make it easier for CW ops to know when they have drifted into an existing voice QSO?
73 Clayton W5PFG _______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb