Nice progress, Jim. For WSJT, Just be sure SatPC32 is exited, then run WSJT. Configure to use only the USB port, and it will use that for both audio and rig control! It’s easy. Just don’t run them both (SatPC32 and WSJT) at the same time and it all works great. Back and forth between them is nice.
Mark N8MH
On Sun, Jan 12, 2020 at 12:54 PM James Brown via AMSAT-BB < amsat-bb@amsat.org> wrote:
I now have sat32/scope working nicely. last week before I added the cat v cable and upgraded to the scope version, I had set up wstj to the ic 9700. I had not actually used it or decoded any signals. It occurred to me that WSJT is controlled only thru usb. I dont see any option to run cat to the wsjt and get audio to it just like sat32 scope? I hope some one has accomplished this. I am hoping to try at least to hear /decode something from Reno on WSJT, but I expect it will be a tall order. Thanks Jim KI6WJ _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb