[amsat-bb] Re: AO-27 Telem

29 Jan 2008

      Hi Chris,
yes, I agree that.
But I think it should be no secret and "we" can ask AMRAD or the AO-27 team
for this telemetry equations.
There are some solutions to generate a KISS file with soundcard based
software (e.g. MixW32). It is only few hours of programming-work in order to
generate the real telemetry data from a KISS File - IF you knows the
equations of the channels.
I believe then it would be much easier to collect telemetry -> world-wide!
73, Mike
DK3WN
-----Ursprüngliche Nachricht-----
Von: amsat-bb-bounces@amsat.org [mailto:amsat-bb-bounces@amsat.org] Im
Auftrag von Gould Smith
Gesendet: Dienstag, 29. Januar 2008 15:53
An: Chris Bloy; amsat-bb@amsat.org
Betreff: [amsat-bb] Re: AO-27 Telem
Hi Chris,
You can use your recording of the telemetry data.  Simply connect the 
recording output into your modem.  AMRAD hasn't published the telemetry 
decoding equations, so you have to use their software to convert the data to
their format and send it in to them for analysis.
Even though you can decode and store the data, the data is not very useful 
to you since you can't equate particular channels and values.
73,
Gould
----- Original Message ----- 
From: "Chris Bloy" chris@photofuture.co.uk
To: amsat-bb@amsat.org
Sent: Tuesday, January 29, 2008 9:04 AM
Subject: [amsat-bb] Re: AO-27 Telem
...
Hi Gould,
Thank for that, I have looked at that page before, but its the actual
decoding that I cannot seem to do.. I cannot quickly turn my TNC on when I
am in voice mode, hence I though i could translate the recording so to
speak..
Just for reference, I can only use my TH-D7 portable as I have no room for
antennas at home..
thanks,
Chris
-----Original Message-----
From: "Gould Smith" gouldsmi@bellsouth.net
To: "Chris Bloy" chris@photofuture.co.uk, amsat-bb@amsat.org
Date: Tue, 29 Jan 2008 08:57:34 -0500
Subject: Re: [amsat-bb]  AO-27 Telem
Hello Chris,
Here is the information on logging and reporting the telemetry for AO-27.
http://www.ao27.org/AO27/tlm.shtml
73,
Gould, WA4SXM
----- Original Message ----- 
From: "Chris Bloy" chris@photofuture.co.uk
To: amsat-bb@amsat.org
Sent: Tuesday, January 29, 2008 8:12 AM
Subject: [amsat-bb] AO-27 Telem
...
Hi All,
Can anyone tell me how to decode the telemetry from AO27?
I have tried to use MIXW in Packet mode and RTTY mode, but all I seem to
get
is the date and nothing else? I even tried to feed it through AGWE to see
if
that would work.. I use AO27 all the time and use a minidisc recorder to
record my passes, and always capture the telem data at the end.. it would
be
good if someone could help me out on this one?
Thanks,
Chris

Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite 
program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
____________
Virus checked by G DATA AntiVirusKit
Version: AVK 18.2572 from 28.01.2008
Virus news: www.antiviruslab.com

[amsat-bb] Re: AO-27 Telem

Mike Rupprecht