Yes
On Thu, Sep 28, 2017 at 5:02 PM, Franklin Antonio antonio@qti.qualcomm.com wrote:
Can't you just tune for maximum signal level received, and bypass measuring SWR?
From: AMSAT-BB amsat-bb-bounces@amsat.org on behalf of Robert Bruninga < bruninga@usna.edu> Sent: Thursday, September 28, 2017 1:25 PM To: amsat-bb@amsat.org Cc: Jin Kang Subject: [amsat-bb] TUning the antennas on a Cubesat
Someone asked me how to tune the antennas on a cubesat without the instrumentation totally becoming part of the antenna system itself?
I said you have to put the SWR instrument inside the cubesat as we did here: http://aprs.org/PSAT2/SWR-testing-0160x.jpg
But that only works on a 1.5U cubesat where and MFJ Antenna Analyzer will fit!
The other method is to just put in a bidirectional coupler chip, and then feed the forward and reflected voltage taps to the internal cubesat telemetry system and then compute the SWR from these two Forward and Reflected power telemetry channels.
Bob, WB4APR _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb