IMO, SDR Console v3 is far better than any other SDR software I have tried for satellites.
After installing, select View, then Satellites. A new window opens. You can configure all the satellites you use and it will set the frequency, control doppler, show you elevation/azimuth and display the footprint on a map. An additional sub-window will show upcoming passes for the satellites you have configured.
V3 was still in Beta last week, but full release is promised for this month.
Rolf NR0T EN34
On Tue, Jun 12, 2018, 3:08 PM Paul Andrews w2hro.fn20@gmail.com wrote:
Satellite Folks,
It there a software package that can fully control a Funcube Dongle Pro+ and emulate a traditional receiver? A la frequency control fine enough for SSB doppler adjustments?
I have used the FDP+ as a pan-adapter on satellite but not the primary receiver. The FDP+ is a better receiver than the Baofeng - if it can be controlled with good granularity.
73 - Paul - W2HRO _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb