Hi Allen, A possible reason of the issue: Each of the 4 configurations of SatPC32 (menu "Setup") is using it's own file "Prior.SQF". I suppose you set up the Prior.SQF file in the main data folder "SatPC32", which is used with configuration #1 (the others are located in sub folders CfgII .. CfgIV of the main data folder). So, make sure that you run configuration #1. 73s, Erich, DK1TB
Am 15.06.2016 um 08:33 schrieb Allen Burrell:
I have successfully implemented control of my Yaesu G-450/G-550 rotors via ERC using SatPC32. I can now track satellites across the sky as I await arrival of transverters to work with my Flex-3000/1500 combo. I have not been able to get the Auto Sat Change feature to work, however. I have set up prior.SQF with a list of prioritized satellites, and set Auto Sat Change to “A+”. When a satellite becomes available, the lettered box highlights, but no changing of satellite to the active one occurs on the screen. Only after I click on the highlighted letter box does it activate the available satellite, allowing rotor control, and later, I hope, frequency tracking. What am I overlooking? Thanks for any help. Al, KI7RM _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb