20 Jan
2014
20 Jan
'14
10:06 p.m.
At 07:09 PM 1/19/2014 +0000, Jim Jerzycke kq6ea@verizon.net wrote:
Buy a diplexer, and connect it as shown in the linked article:
http://www.amsat.org/amsat-new/articles/Mode-J/
I also tilt both of my Yagis so they're 45* to the boom, which makes them 90* to each other.
Yes, I lose some signal on terrestrial use, but ti helped cut the coupling, and desense, down quite a bit.
73, Jim KQ6EA
One thing I've always wondered about this is, would one what to put a 50 ohm non inductive resister on the 2M output of the diplexer? or shouldn't that make much difference.
KB7ADL