Hi,
2. The program does allow you to enter the callsign and forwarding permanently. However, it doesn't always work. :
Earlier this year, I had it running with no problem on my XP machine. I bought a new WIN7 machine, and the install seemed to go well, except that it complained there was no ??? directory to install something it needed. I don't recall the exact wording, but I read the error message and manually created the directories it wanted in a fake user profile on the C drive. After helping it, the installation seemed to go normally. (It was installed, and is run, from a full administrator account.) However, I found the same problem you have. I had to reenter the data every time it started. There was also a problem with some of the associated panes not displaying properly unless they were maximized
Here is what I eventually did. I tried reinstalling the program several ways, but no help. Next, I tried running the RESET-CONFIG-FILE.BAT in the ARISSATTLM directory, which deletes the configuration file. No change, even after running the program, and then another clean reinstall. From the batch file, the configuration file is stored here:
"%USERPROFILE%\DESKTOP\ARISSATTLM\ARISSatTLM.CFG"
I ran a global search but did not find the ARISSatTLM.CFG file. Then I went to the directory, empty, and manually created an empty file with that name. Started the program, but no help. Finally, I reinstalled the program over itself. That fixed it! This also fixed the issue with the various program panes not displaying as they should.
It appears that on some version and configurations of WIN7 there is a problem creating the file. I have WIN7 Pro 32 bit. It is configured to store the OS on C drive, and the User data on F drive. That has confused at least one other program.
So make certain you have an ARISSatTLM.CFG file. If not, create and empty file of that name, run the program, and if it is still not working, reinstall it over itself. That worked for me, though there must be a more efficient way to get there. Let me know if it solves your problem.
73s,
Alan WA4SCA
-----Original Message----- From: amsat-bb-bounces@amsat.org [mailto:amsat-bb-bounces@amsat.org] On Behalf Of Sion Chow Q. C. (9W2QC) Sent: Thursday, August 04, 2011 10:04 PM To: amsat-bb@amsat.org Cc: sangatsingh@gmail.com Subject: [amsat-bb] ARISSat-1 over West Malaysia
Dear All,
It was great to receive ARISSsat-1 over West Malaysia during 5th August 2011, 0223 UTC pass. Maximum elevation was 89 degrees.
The downlink of both 145.919 MHz USB and 145.950 MHz FM was 59+60db, very strong but with huge QSB observed. A total of 3 SSTV pictures were forwarded to the ARISS SSTV gallery and some telemetry/Kursk data were forwarded by ARISSatTLM.
Congratulations to all those involved with ARISSsat-1 and we look forward to trying out the transponder on the next pass.
A few questions I have if someone could please help me clarify them: 1. Is it possible to have the callsign and forwarding telemetry option always set in ARISSsatTLM? This way, we do not have to manually enter the callsign and enable telemetry forwarding each time the program starts up. 2. Does the CW beacon needs to be really +/- 100 Hz of the yellow line? The reason for this is that I would like to see how much offset should I apply to doppler control, for possible automated reception. 3. In low power (eclipse) mode, how often does the BPSK1000 telemetry transmits?
Thank you.
73, Sion Chow Q. C., 9M2CQC, Also: WQ2C /HL1, 9V1QC, JG1XHM ex: 9W2QC, AB3IO
_______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb