I have been using object D and it does a fair job in keeping up with the Doppler shift. The signal get up to 6db above the noise with fades in the noise during the pass. I have a 15 db gain antenna and a system noise figure about 2 db.
nick
-----Original Message----- From: amsat-bb-bounces@amsat.org [mailto:amsat-bb-bounces@amsat.org] On Behalf Of SANDEEP MANI TRIPATHI Sent: Tuesday, October 18, 2011 8:33 AM To: Carl Rimmer W8KRF Cc: Sanjay Srikanth Nekkanti AB3OE; amsat-bb@amsat.org; Dinesh Cyanam KC2YQJ Subject: [amsat-bb] Re: SRMVU Keps?
Great to hear from you regrding SRMSAT.
Thanks a lot, it would be great if you provide telemetry data for entire pass.
73's KF5HDB Sandeep Mani Tripathi Team SRMSAT Chennai,India +919884858514
*Life is a Journey.....not a Destination. Enjoy the Trip !!!*
On 18 October 2011 18:25, Carl Rimmer W8KRF w8krf@w8krf.net wrote:
This morning I initially used the lastest Keps for Object B and was able
to
copy the CW telemetry, however, at Object B's LOS, I was still copying the signal. I switched to Object D and was able to copy CW for another minute or so before LOS which corresponded with the Object D LOS. Hopefully, I will be home for the next pass and will use Object D for SRMVU.
The telemetry I copied was SRMVU C Z Z P C C at EN91ck for the 0043UTC (approx) 7 degree pass.
73,
*Carl W8KRF* ______________________________**_________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings:
http://amsat.org/mailman/**listinfo/amsat-bbhttp://amsat.org/mailman/listin fo/amsat-bb
_______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb