Can someone remind me (again) what a satgate configuration should look like? Isn't it a standard Igate connected to a particular APRS-IS server?
Actually, it is a standard Igate connected to your favorite standard APRS server. Since ALL of the packets from ANDE and RAFT are all APRS packets, they should go directly into the APRS-IS via what ever is best for you. Though I welcome an opinion by the APRS-IS folks.
We only set up the special SATgate servier for PCSAT-2 that had a lot of 9600 baud science data that did not need to be flooded into the APRS-IS. But now, with ANDE and RAFT, it is all standard APRS at 1200 baud, so it should be fine for the normal APRS-IS.
So, all you have to do is QSY your Igate radio from the national APRS frequecny to 145.825...
**** AND **** TURN OFF GATING TO RF ********* **** THIS IS ABSOLUTELY CRITICAL ******
That should do it.
Thanks! Bob, WB4APR