Nick,
Going to skip the Symposium for a couple of years.
WA4SCA On Oct 10, 2015 9:58 AM, "Nick Pugh K5QXJ" quadpugh@bellsouth.net wrote:
Txn Alan cu next week
Thanks
nick Office 337 593 8700 Cell 337 258 2527
Helping UL become a world Class Engineering and Educational School Disagree I Learn
-----Original Message----- From: Alan [mailto:wa4sca@gmail.com] Sent: Saturday, October 10, 2015 7:11 AM To: 'Nick Pugh K5QXJ'; amsat-bb@amsat.org Subject: RE: [amsat-bb] ao 85 telem help
Nick,
I am traveling, so have not had a chance to use live data. PowerSDR attenuates the audio significantly below 300 Hz, but is not a brick wall. You can hear and see the PL tones on a local repeater. During pre-launch testing, I was able to play I/Q files through PowerSDR and get fair copy of telemetry, but not anywhere as good as through a program which does not have low pass filtering, such as SDR#. Dave, W0DHB suggested switching to I/Q from PowerSDR to FoxTelem which _should_ bypass the filtering. I will get a chance to test it in a few days.
I found the secret of getting audio from the monitor is to turn it on. :) The button label is backward to my thinking. You will need to uncheck some of the filtering boxes to get full voice audio.
73s,
Alan WA4SCA
-----Original Message----- From: AMSAT-BB [mailto:amsat-bb-bounces@amsat.org] On Behalf Of Nick Pugh K5QXJ Sent: Saturday, October 10, 2015 5:59 AM To: amsat-bb@amsat.org Subject: [amsat-bb] ao 85 telem help
My set up is flex 5000 virtual audio cables I get good eye pattern when signal is not if a fade. But have not been able to decode telemetry.
I also have no audio out on the monitor.
Any suggestions?
Thanks
nick
Office 337 593 8700
Cell 337 258 2527
Helping UL become a world Class Engineering and Educational School
Disagree I Learn
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb