Yes, it does have CAT support. Just need to make sure USB on D74 is not in Mass Storage mode. Hamlib, like I said, most likely will need to be built from source. The support is marked as Alpha. Don't have my raspberry up and running at this time, but i believe it is 291 (or somewhere close - just run "rigctl -l | grep TH-D74" to see if you have it) in Hamlib library. If you have to rebuild Hamlib from source - you would need to enable build option for ALL radios.
On Fri, Feb 14, 2020, 3:01 PM John Brier johnbrier@gmail.com wrote:
The TH-D74 has CAT?
73, John Brier KG4AKV
On Fri, Feb 14, 2020, 15:42 Dmitry Mizin via AMSAT-BB amsat-bb@amsat.org wrote:
Also installed Gpredict for Buster. Went beyond just opening it up - this RPi is at heart of my portable setup - using it with TH-D74A for downlink and IC-706MKIIG for uplink controlled with Gpredict, Hamlib and via USB. At some point i also did the build of the most recent Gpredict (there were couple additions to the program not yet in the deb file) - once all prerequisites were installed, built out went without any issues.
Just for those curious - TH-D74 required me to build Hamlib from source on RPi as the one in the repository did not have support for this radio.
Gpredict is great program and in some way I like it even more than SatPC32. The only feature it is missing is fine adjustments for VFO on the radio. But I figured out how to work it.
Dmitry, N6DNM
On Fri, Feb 14, 2020 at 7:48 AM Burns Fisher via AMSAT-BB < amsat-bb@amsat.org> wrote:
Gpredict is very easy to install on a Raspberry Pi. I did so on the "Buster" version of Raspbian. There is a .deb file to download and it
just
installs and runs. Disclaimer: I have not tried to use it more than
just
to see that it started up ok and displayed satellites.
73,
Burns WB1FJ
On Thu, Feb 13, 2020 at 7:49 PM Joseph Armbruster via AMSAT-BB < amsat-bb@amsat.org> wrote:
James,
Look into up-board.org, should suite you better than a RPi. It's not cheap but it's not expensive either, considering what you're getting for the size...
73's, Joseph Armbruster
On Thu, Feb 13, 2020 at 7:12 PM Hans BX2ABT via AMSAT-BB < amsat-bb@amsat.org> wrote:
You could install Ubuntu instead of Raspian, I guess. Gpredict is in
the
repositories.
At any rate: GIYF.
Hans
BX2ABT
P.S. I always think it is funny that people want something cheap,
small
and lean like an RPi and still expect something like the whole
clunky
Windows system with its software to work on it. The RPi was designed with the maker/educator in mind and that almost automatically means using a Linux based distro.
So please, if you want to start tinkering with RPis or other single board computers (SBCs) then start changing your thinking and that
means
no more Windows. If you don't want to change, then don't consider
low
cost SBCs an option.
On 2/14/20 2:52 AM, Paul Stoetzer via AMSAT-BB wrote:
I answered you when you asked this on January 29th, but will
provide
more
detail as to why this isn't possible without quite a bit of
effort.
The Raspberry Pi uses an ARM-based processor, generally running
some
distribution of Linux. SatPC32 is written for computers using
x86-based
processors running Windows. There is a possibility you could get
it
running, slowly, with a lot of effort through use of x86 emulation
and
the
Wine compatibility layer, but it would require quite a bit of
rather
advanced work.
Gpredict is the software you want to use for satellite tracking
and
it
works great on the Raspberry Pi. Unfortunately it's not in the
Raspbian
repository, so it does require some work to get it installed.
Without
knowing what operating system or what version of the Raspberry Pi
you
are
using, I can't direct you to the proper guide.
73,
Paul, N8HM
On Thu, Feb 13, 2020 at 1:37 PM James Brown via AMSAT-BB <
amsat-bb@amsat.org>
wrote:
> Is anyone running sat 32 on a raspberry computer? If so how
would I
set
> it up? > Jim KI6WJ > _______________________________________________ > Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum
available
> to all interested persons worldwide without requiring membership.
Opinions
> expressed > are solely those of the author, and do not reflect the official
views
of
> AMSAT-NA. > Not an AMSAT-NA member? Join now to support the amateur satellite
program!
> Subscription settings:
https://www.amsat.org/mailman/listinfo/amsat-bb
> _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum
available
to all interested persons worldwide without requiring membership.
Opinions expressed
are solely those of the author, and do not reflect the official
views
of
AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite
program!
Subscription settings:
https://www.amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum
available
to all interested persons worldwide without requiring membership.
Opinions
expressed are solely those of the author, and do not reflect the official
views
of
AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite
program!
Subscription settings:
https://www.amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership.
Opinions
expressed are solely those of the author, and do not reflect the official views
of
AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite
program!
Subscription settings:
https://www.amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership.
Opinions
expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite
program!
Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb