Jim, that's the very reason I installed a counterbalance.
Everyone, my question really was based on what I'm seeing when my antennas rotate in AZ. Given the moment arm of the counterbalance (about 3 feet) and 5 LB weight on the end, once the rotor stops at an azimuth, I get about 3 cycles of wobble back and forth. It does not affect satellite signal (beam width) but I was wondering what it was doing to my rotor gears.
On the other hand, it's been like that for over 6 months of operation with no issues.
It could be I'm finding comfort in worrying about something ELSE at this time....if you get my meaning.
73,
Bob W7OTJ
On Thu, Apr 2, 2020 at 8:13 AM jim--- via AMSAT-BB amsat-bb@amsat.org wrote:
Bob Hammond asked (in part):
I have my M2 LEO antennas plus a WiMo 23cm helical antenna end-mounted
on a
fiberglass boom with the G-5500. I also placed a counterbalance lead weight opposite the antennas.
How many of you with similar antennas and a G-5500 have NOT used a counterbalance? Any issues?
I would highly recommend against using any substantial antenna arrangement on an elevation rotor without it being balanced. If it is not balanced, you are putting far more strain on the gears and motor. Try this to understand the difference. Take your antenna, and hold it at one end with one hand. Point it at the horizon. Then rotate it so it points straight up. Now move your hand so it is at the balance point, and repeat the demo. Which one do think is easier? Don't have an antenna handy, use a long piece of pipe, or conduit, or rebar, or even a stick or baseball bat.
73
Jim Walls - K6CCC jim@k6ccc.org
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb