Hi Joel, I had to play with the baud rates to get it tracking. Still have a couple issues but it does fine. Try lowering the rates on the com port and match it with that in the program and see what you get. Joe KI4TZ
Joel Black wrote:
I am trying to get SatPC32 v12.8 to automatically tune my FT847. When the program first comes up, the radio is initialized as indicated by the "CAT" display and when I click on a satellite, the radio tunes to the correct satellite. That's where it stops; it no longer changes the frequency of the radio. If I turn off and turn back on CAT control, it will update once and will then quit again. I have the same problem with my FT-857.
I have read the help and .SQF files, but I cannot seem to find the right combination. I have changed the baud rate of the radio and the program to 4800, 9600, and 57.6k and made the corresponding changes with the CAT delay value as recommended by the manual. I have not yet tried uninstalling and re-installing the app.
I am running Vista 32bit and using a USB-to-serial converter which works with everything else. The same converter works with the HRD 5.0 Satellite Tracker. Problem is, I cannot get HRD to accept sub-audible tones so I can work AO-51. I don't know if it's a limitation of the program or cockpit error.
Any suggestions, known issues, or anyone else having the same problem(s)?
Thanks, Joel, W4JBB
No virus found in this outgoing message. Checked by AVG - www.avg.com Version: 8.5.420 / Virus Database: 270.14.4/2416 - Release Date: 10/05/09 18:23:00
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb