I should add that I'm using the following pin number connection:
KPC: As you look at the connector on the rear panel, it goes 5 4 3 2 1 9 8 7 6
TS-2000: As you look at the connector on the rear panel, it goes: 13 9 10 11 12 5 6 7 8 1 2 3 4
On Sun, Apr 25, 2010 at 2:51 PM, Nathaniel S. Parsons nsp25@cornell.edu wrote:
Hi everyone,
Thanks for the help with our 4800 bps issue. We haven't found a solution yet, but we're working on it, and I'll let you know when we have something figured out.
Just now, I found a Kantronics KPC-9612+ lying around the lab, and would like to fire it up with our TS-2000 to see if it's still in working order. Can someone check to see if I've figured out the pinout correctly? I'll put the KPC pins on the left, and the TS-2000 pins on the right.
1 (Audio out) - 11 (Mic in) 2 (Carrier detect) - 5,7 (Main/sub squelch) 3 (PTT) - 9 (PTT) 4 (CTRLB) - Not connected 5 (RXA) - 1,3 (Main/sub out) 6 (GND) - Any of 4,8,12 (GND) 7 (Ext-In) - Not connected 8 (CTRLA) - Not connected 9 (GND) - Any of 4,8,12 (GND)
TS-2000 pins not connected: 2,6,10,13
Thanks, Nate KC2SVI