13 Jul
2012
13 Jul
'12
7:51 p.m.
OK, that's identical to the Fox Delta ST1 kit.
Have you calibrated it?
The procedure is here, on the Fox Delta page:
http://www.foxdelta.com/products/st1.htm
Scroll down to *Setup Guideline for SatPC & Nova for Windows**
*
On 07/14/2012 01:40 AM, Matt Severin wrote:
A Sat688 rotor interface. Matt On Fri, Jul 13, 2012 at 9:13 PM, Jim Jerzycke <kq6ea@verizon.net mailto:kq6ea@verizon.net> wrote:
What rotor interface are you using? Jim KQ6EA On 07/14/2012 12:02 AM, Matt Severin wrote: While working with the 8 teachers at Teachers' Institute II, I had a variety of computer operating systems. We had some odd behavior with the Win7 machines, but I am not sure if this was a fluke or a pattern. We were using SatPC32 v12.8b with the SAEBRTrackBox setting in the software, and the students with issues were running Win7. The G5500's did not always respond as expected. For example, if we commanded it to move to 45 degrees elevation, it would, but if we manually entered 179 degrees it would drop down to about 25 degrees. The fix seemed to be to set the turning point of azim rotor under the 'Rotor Setup" to S instead of N. I am running v12.8a and have not trouble with the exact same set up and I am set to 'N". Has anyone else experienced this? In my trouble shooting, I believe I was able to trace it back to the computers/software. Any thoughts? Thanks in advance. Matt, N8MS _______________________________________________ Sent via AMSAT-BB@amsat.org <mailto:AMSAT-BB@amsat.org>. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb _______________________________________________ Sent via AMSAT-BB@amsat.org <mailto:AMSAT-BB@amsat.org>. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb