Hello Vincenzo,
On WispDDE you can set/change band limits within Radio Settings / Radio Index / Auto Selection Configuration
There you can set Freq.ranges in MHz or 'ALL'
Select 'ALL', so you can set through wispDDE any frequency including Weather Sats.
If your TS-2000 or whatever rig you use accepts 137 MHz then you can set frequency for Weather Sats through http://amsat.org.ar/pass.exe or any other program you use.
73, lu7abf, Pedro
On Sun, Dec 25, 2016 at 8:14 AM, Vincenzo Mone vimone@alice.it wrote:
Hi folks,
I am trying the WispDDE client to set the radio frequencies for a Kenwood TS-2000.
I've noticed that when I have a NOAA and METEOR satellite, the frequency is not configured properly,
but it affirms me on the radio with a frequency of only three digits or it does not set the frequencies.
Any help how to do it or can suggest me other clients that I can interface with Orbitron or Pass setting correctly all the satellites?
Thanks and Merry Christmas to all
73 de Enzo IK8OZV EasyLog 5 BetaTester EasyLog PDA BetaTester WinBollet BetaTester D.C.I. CheckPoint Regione Campania Skype: ik8ozv8520
******************************************* ****** GSM +39 328 7244294 ****** ***** SMS +39 328 7244294 ***** *******************************************
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb