On 3/22/2019 05:56, Bob KD7YZ wrote:
So I have a K3 which "generally" Rx's on VHF mode (Downlink)
And I have an IC910 which therefore is usually on xmit on the UHF side (Uplink).
Thanks for the replies.
DxKeeper is unable to read from the Uplink RADIO and then the Downlink radio. There is usually the excuse that IC910 too convoluted or why doesn't I question asker write it himself.
I have used it for ten years. It's a nice suite.
Ill suited for TWO radios which must run in parallel. .. or I couldn't hear my "dit dit dit" when I was spotting myself.
right?
I have windows 10. MacLogger is, uh, for a Mac
This "should" be simple. I see Erich's SatPc32 simultaneously read Uplink as well as downlink, then make some clever individual radio QRG changes. He's a master at this. SatPc32 is holding both of my separate rigs QRG at that moment.
At a dozen times a second, it seems.
Well lads, I had to ask. I see it is impossible for a windows based logging system to read an IC910 and A K3 for quick logging purposes.
and now the flogging I get for daring to need such a program.
-- 73 Bob KD7YZ AMSAT LM #901