I thought the whole idea with these SDR "Dongles" is that you could decode practically anything in software. Unless the required bandwidth is too high, and perhaps not in real time, but they can be decoded. For example, people do SSB and FM with them, neither of which are anywhere close to DVB-T modulation.
Couldn't something like that be done with HamTV?
Greg KO6TH
Miguel Barreiro wrote:
Raydel,
Apart from the frequency and signal level differences, DVB-T is a 6-8MHz wide signal with COFDM modulation, using 2k to 8k subcarriers, while DVB-S is a single carrier, 6..36MHz wide signal, usually QPSK or 8PSK. You cannot use a downconverter and a DVB-T receiver to tune into a DVB-S channel.
However, the digital bitstream carried by both is the same - so if you have software analyzers and audio/video players for DVB-T they will work for DVB-S too.
Miguel EA1ICZ
2013/5/21 Raydel Abreu Espinetcm2esp@frcuba.co.cu
Hello,
About the future HamTV experiment, is it possible to use a cheap RTL DVB-T dongles used or RTLSDR to receive such signals with proper LNA and downconverter. If the downconversion fits the signal on a proper channel does it device is capable of decode the transmitted format???
Thanks,
Raydel
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb