Hi. I am Mrs Nayer from polytechnic(Amir Kabir) university in tehran IRAN, Telecommunication engineering student in MA degree and dont have callsign. Best Regards.
On Tue, Aug 9, 2011 at 1:18 AM, nh6vb Scheller nh6vb@msn.com wrote:
Mr. Mahdinejad
There should be no problem receiving receiving FM signals from the ISS. What ICOM receiver are you using, and what is your QTH? After receiving that information from you, I will give you the instructions you need.
73, Peter, NH6VB
Date: Mon, 8 Aug 2011 17:01:27 +0430 From: n.mahdinejad@gmail.com To: amsat-bb@amsat.org Subject: [amsat-bb] iss beacon receive and vhf preamp
Dear amsat members.
I have some question about receiving beacon signal from ISS.
Could you please help me?
- What is the difference between ISS, ARISS and ZARYA? Is these
different satellites or 1 satellite with 3 name? 2. Which of them is easier to receive beacon from them? 3. Frequency of beacon signal of ISS is in VHF band. Is it available
without preamp? I use 2 preamp. One for VHF and 1 for UHF band. But the preamp in vhf band isn’t on. I mean that icom receiver could not supply
it.
I activate preamp in vhf band in set menu of icom radio. The uhf band preamp on and I use it. But for vhf when I push the preamp button in
front
panel of icom the preamp writing is visible for 2 seconds and then turned off and isn’t visible.
Any help would be gratefully appreciated.
Beat Regards.
N.Mahdinejad _______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite
program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb