See this ongoing thread:
https://www.amsat.org/pipermail/amsat-bb/2020-October/080138.html
Quoting:
"Hi Tony,
Quite a few of us have tried. Briefly, NO. We can receive at 9600 baud sort of (quick explanation follows), but cannot get the radio to transmit at 9600.
I don't think I was ever able to use the audio out of the radio (FM-D, etc) into a real TNC and decode it. Not sure anyone has...
To receive--use the IF via USB audio; use a program like SDR# with FM (all filters off, 10-12kHz wide), feed that audio into hs_soundmodem that then connects to PacSat Ground Station software.
Sadly, the fplks at iCOM are not responding to the request several of us have made to figure out a way to get to work at 9600. Surely it's doable---but iCOM doesn't seem to think it's worth the time/investment...
Mark L. Hammond [N8MH] AMSAT Director and Command Station"
73, John Brier KG4AKV
On Sat, Oct 24, 2020 at 4:16 PM Tony via AMSAT-BB amsat-bb@amsat.org wrote:
All:
Does anyone know if the ICOM 9700 is capable of 9600 baud in it's current form or will it have to be modified?
Tony
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb