I see that you have already gotten some great replies, but it also sounds like you might be searching for orientation on satellite telemetry reception in general.
Here is a page that I referred to often when I was getting started (not that I'm all that advanced NOW!) and besides this specific page, there is an endless amount of info on that site if you wish to scan the menu options across the top:
http://www.pe0sat.vgnet.nl/decoding/block-diagram/
-Scott, K4KDR Montpelier, VA USA
======================================================
-----Original Message----- From: Gerald Payton Sent: Tuesday, August 30, 2016 4:05 PM To: Amsat BB Subject: [amsat-bb] Telemetry Information PLEASE
While awaiting "parts" to assemble my station, I am interested in the TELEMETRY reception from the birds. I was looking at the "Leader Board" for FOX-1A on Amsat.org. Looking at some of those stations posted there I noticed that FoxTerm 1.04f software listed, but no TNCs. Now I am confused.
I believe that the FoxTerm software may decode received audio from the passes, but what about other satellites. Is a TNC needed, especially with the 9600 baud?
I'm sorry, I am trying to figure out HOW to receive and decode the telemetry signals and just do not comprehend the procedures. The AMSAT website does not seem to supply that information, and neither does the "Getting Started 2016" book.
If it is too much to answer here, please contact directly at my email: gp_ab5r@outlook.com
73,
Jerry AB5R