Not sure Mark,
but what digital satellites are you referring to? For the APRS or PSK31 you don't need or want the IC-9100 digital mode. You use the usb port for the programs and set menu 56 data off mode to usb.
Stefan, VE4NSA
On Sun, Jun 14, 2015 at 1:56 PM, Mark Johns via AMSAT-BB <amsat-bb@amsat.org
wrote:
Ah! Thank you, Dave. Just what I needed. And I should have known that, but I think my brain is getting fried from struggling with this all weekend. Thanks again. -- Mark D. Johns, KØMDJDecorah, Iowa USA EN43----------------------------------------------- "Heaven goes by favor; if it went by merit, you would stay out and your dog would go in." ---Mark Twain From: Dave Webb KB1PVH kb1pvh@gmail.com To: Mark Johns mjohns166@yahoo.com; Mark Johns mjohns@luther.edu Cc: AMSAT -BB amsat-bb@amsat.org Sent: Sunday, June 14, 2015 1:42 PM Subject: Re: [amsat-bb] SatPC32 CAT strings?
Mark,From the "What's new" section on the Satpc32 website.
Starting with Vers. 12.8c1. The CAT commands for the IC-9100 have been expanded. The program can now activate the digital mode of the radio. The mode entry in Doppler.SQF for this function is FMD.Dave-KB1PVHSent from my Samsung S4
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb