Why do you need a preamp in the mobile? Most new rigs are great at sensitivity. You must also remember that if you are mobile, Intermod is just around the corner at these high sensitivity preamps. Preamps, as a rule, should be as close to the antenna as mechanically possible. Good Luck, 73, Dee, NB2F
-----Original Message----- From: amsat-bb-bounces@amsat.org [mailto:amsat-bb-bounces@amsat.org] On Behalf Of Zachary Beougher Sent: Wednesday, March 30, 2011 10:24 AM To: amsat-bb@amsat.org Subject: [amsat-bb] Preamp Distance from Antenna
Hi,
I am in the process of getting the ARR SP432VDG preamp for my mobile setup (and just to have around), and I have read that the closer to antenna you mount the preamp, the lower noise figure you will have. My question is, what is close to the antenna - 1ft., 5ft., 10ft.? Ideally, I would probably mount it about 5-6ft. from the antenna (1/4 wave) - would this be acceptable?
Any additional advice would be appreciated!
Zack KD8KSN _______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb