Yes I use that also. For Transmit.
I was using FL-Digi for recv, but the single channel I know I was missing people calling me.
I tried some of the others that use a multi trace capability. but wasn't too happy with it.
But just now tried ACDS, and was quite impressed on it's working. The 34 seperate ummm channels or passbands? anyway,the being off freq, or freq sweeping too fst will not it seems to be a problem with that program.
Joe WB9SBD Sig The Original Rolling Ball Clock Idle Tyme Idle-Tyme.com http://www.idle-tyme.com On 1/28/2017 9:29 AM, Robert Bruninga wrote:
Would it be a good idea to mention what you use for uplink doppler correction? I assume Andys K0SM's DopplerPSK?
http://www.frontiernet.net/~aflowers/dopplerpsk/dopplerpsk.html Bob
On Fri, Jan 27, 2017 at 5:56 PM, KO6TZ Bob my.callsign@verizon.net wrote:
Joe,
I was not on that pass.
Most of the time, you will see the telemetry very strong down at 310Hz. You should see your own signal where ever you put it. (I use 1600Hz) You should also see the non Doppler corrected beacons. These skew across the waterfall. Won't waste time trying to copy them.
Now for FlDigi... The maximum acquisition range is 500 Hz. If the signal is not within the "Red" bar limit above the waterfall, the program will not look for it. Also look in the configuration for multi option being selected.
CONFIG/OPERATOR/MODEM/PSK/MULTI
As a frequent user of NO-84_PSK31, I recommend DigiPAN or WinPSKse. They each have their advantages. DigiPAN copies many signals with limited AFC. WinPSKse copies only two signals with 3,000Hz of AFC. Your choice.
Bob KO6TZ
I had a decent pass just now, Saw mine as well as a few other signals and the telemetry.
Key word is I "SAW" in the waterfall these signals.
BUT.. not one of them would decode.
Anyone have a guess what might be happening?
Joe WB9SBD
Sig The Original Rolling Ball Clock Idle Tyme Idle-Tyme.com http://www.idle-tyme.com
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb