I got it working both with Omnirig and using cat with virtual serial port manager. I’m not sure the frequency calibration is very accurate but that can probably be adjusted in HDSDR.
Thanks for the advice.
73 Rick, W2JAZ
On Sat, May 1, 2021 at 1:54 PM tjschuessler@verizon.net wrote:
Yes, you can use the Omnirig interface with HDSDR You can use SatPC32 to control HDSDR as the receive radio as HDSDR will be set up to look like a TS2000 to SatPC32. It becomes radio 2 with the 847 transmit as Radio 1. It does work but is some what finicky to get going.
*From:* Richard Lawn rjlawn@gmail.com *Sent:* Friday, April 30, 2021 3:12 PM *To:* Amsat BB amsat-bb@amsat.org *Subject:* [AMSAT-BB] Help Setting up SatPC32 with HDSDR and SDR Play
I added an IF tap to my FT-847 with the idea of using an SDR Play RSP1. The idea was to get SatPC32 to talk to HDSDR and track the tuning of the 847. For the life of me I can't seem to get this all to work. I know it does but it apparently is beyond this musician's brain to sort out!
73
Rick, W2JAZ