Bob,
Being the father of APRS, I would think a call to Yaesu might result in a Firmware change to add the function.
73,
Angelo
On 6/1/2017 11:14 AM, Robert Bruninga wrote:
Apparently, the current version of the FTM-100DR cannot set an APRS path for digipeating via the ISS.
W9BU reports:
See page 41 of the FTM-100DR APRS manual. Your choices for digipeater route are "OFF", "WIDE1-1", or "WIDE1-1,WIDE2-1". Other than those three selections, the route is not configurable.
This leaves out via ARISS, or the universal via APRSAT which should be supported by all APRS satelliites.
Bob, WB4APR _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb