Hi Dave,
On my 9700 I have SATPC32 V+ (VFO Mode On) selected which allows me to tune up and down the band with the radio's VFO knob and SATPC32 freq display follows that and changes accordingly. I also look for my CW signal on the waterfall with CW+ (CW MODE ON) and use the up/down Cal to get synced up then it's a mouse click to CW- to get back to SSB. I'm a newbie but that's what I found so far works for me.
73 de Cal/N3CAL
-----Original Message----- From: AMSAT-BB [mailto:amsat-bb-bounces@amsat.org] On Behalf Of Dave J via AMSAT-BB Sent: Monday, July 01, 2019 10:15 PM To: amsat-bb@amsat.org Subject: [amsat-bb] IC-9700 and SATPC32 linear tuning
Hello folks:
I just upgraded my tired FT-847 for a new IC-9700. FM birds are not a problem but I'm wondering if someone has a good method of finding your signal on the linear birds while using SATPC-32 revision 12.8d. The only way I can vary the TX frequency is under the CAT Tuning menu Upl Calib field. It seems to work but it's a bit clunky and not very quick. If I try to change the transmit frequency on the radio it only gives me a few seconds then reverts back to what is on the main screen of the PC. If I try changing the receive frequency, the transmit frequency changes as well. Probably new radio operator error but I would appreciate any suggestions.
Thanks//Dave WB9YIG
_______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb