I'm going to wait for the fix for the 9700. In the meantime I'm now collecting telemetry with my FIAB with a eggbeater antenna setup that I'm going to leave up here for the winter. I'm seeing a much better decode rate with 1.08p over 1.07y, about 2 to 1. So I'm seeing 1.08 is clearly better then 1.07. Thanks Chris!
73 Jeff kb2m
-----Original Message----- From: AMSAT-BB [mailto:amsat-bb-bounces@amsat.org] On Behalf Of Kevin via AMSAT-BB Sent: Wednesday, October 30, 2019 12:54 PM To: amsat-bb@amsat.org Subject: Re: [amsat-bb] IC-9700 & foxtelem 1.08p
Hi Alan and everyone else that replied,
Windows Sinc also has zero decodes, tried all decoder modes.
for now 1.07y FTW
Thanks Kevin
On 10/29/2019 23:20, Alan wrote:
I you are using the Raised Cosine decoder, try the Windows Sinc instead.
73,
Alan
WA4SCA
*From: *Kevin via AMSAT-BB mailto:amsat-bb@amsat.org *Sent: *Wednesday, October 30, 2019 12:21 AM *To: *amsat-bb@amsat.org mailto:amsat-bb@amsat.org *Subject: *[amsat-bb] IC-9700 & foxtelem 1.08p
Hi All,
Any IC-9700 users out there that have switched to foxtelem 1.08p
using USB and IQ mode? I see a good eye but get zero decodes, dropping
back to 1.07y and it all starts working again.
73
Kevin WA7FWF
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership. Opinions expressed
are solely those of the author, and do not reflect the official views of AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
_______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb