Alex, You need unfiltered audio out from your radio. Singalink won't work.
I am not familiar with the IC821H but you need to tap the 9600 baud output and feed it directly into your computer's sound card. Best to use the UZ7HO free software modem. Take a look around the internet there are many write-ups on how to do this. 73, Adrian AA5UK
On Sunday, October 7, 2018, 12:21:29 PM CDT, alex weimer ingejack@cox.net wrote:
I am running an Icom IC821H transceiver and the Signalink usb along with UISS software running the UX7HO High speed packet modem. However I can't seem to get this system to decode 9600 baud packet on falconsat-3 or Elfin A or B satellites. Is anyone using this combination to decode or send packets through the Falconsat-3 digipeater on 9600 baud ?? I have tried varied jumper wire settings on the Signalink and can send and decode 1200 baud packet with no problem. When trying 9600 baud the radio is set for 9600 baud using SET Mode but it still will not decode 9600 baud packets.. Anybody out there have an answer ?? Thanks JACK KC7MG _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb