I am new to cubesats & am having decode issues. I have the Polysat CPX decoder and finally got correct keps pasted into decoder preferences>satellite.
I am using SAT-PC32 and have appropriate keps and freq data loaded. Program tracks CP-6 correctly and agrees with tracking info in CPX decoder.
Radio is IC910H in LSB mode and radio is tracking SAT-PC32 doppler freq data OK. Today (June 7), I had a decent pass with reasonable EL. Antenna are tracking CP-6 ok via SAT-PC32. I heard nothing during today's 10 min pass.
I believe I have another issue beyond not hearing signal. I am using an AEA DSP2232 tnc between IC910H and CPX decoder. It is set for 9600baud packet data from copying now defunct GO-32 BB. I believe I need to figure out how to set it up for 1200baud FSK. Is that correct?
Jim
K7EG