7 Oct
2018
7 Oct
'18
10:09 p.m.
Adrian: The IC821H has unfiltered audio out of the data port which I did feed to the Signalink and used the high speed UZ7HO modem. Still didn't work !! Maybe that is the answer... feed the audio direct to the computer and bypass the signalink ?? I will try that, Thanks a lot 73 JACK KC7MG
On October 7, 2018 at 3:51 PM Adrian Engele aa5uk@yahoo.com wrote:
Alex, You need unfiltered audio out from your radio. Singalink won't work. I am not familiar with the IC821H but you need to tap the 9600 baud output and feed it directly into your computer's sound card. Best to use the UZ7HO free software modem. Take a look around the internet there are many write-ups on how to do this. 73, Adrian AA5UK On Sunday, October 7, 2018, 12:21:29 PM CDT, alex weimer <ingejack@cox.net> wrote: I am running an Icom IC821H transceiver and the Signalink usb along with UISS software running the UX7HO High speed packet modem. However I can't seem to get this system to decode 9600 baud packet on falconsat-3 or Elfin A or B satellites. Is anyone using this combination to decode or send packets through the Falconsat-3 digipeater on 9600 baud ?? I have tried varied jumper wire settings on the Signalink and can send and decode 1200 baud packet with no problem. When trying 9600 baud the radio is set for 9600 baud using SET Mode but it still will not decode 9600 baud packets.. Anybody out there have an answer ?? Thanks JACK KC7MG _______________________________________________ Sent via AMSAT-BB@amsat.org. mailto:AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb