22 Oct
2020
22 Oct
'20
7:29 p.m.
Brian:
Would you happen to know Kevin's call off hand? I don't have a copy of the journal.
Tony -K2MO
On 10/22/2020 5:10 PM, Brian Wilkins KO4AQF wrote:
Tony
In the May/June 2020 article, Kevin worked it with the Internal TNC.
On Thu, Oct 22, 2020 at 4:29 PM Tony via AMSAT-BB <amsat-bb@amsat.org mailto:amsat-bb@amsat.org> wrote:
Brian: The Kenwood 710 seems capable with it's built-in modem. Would you happen to know if it will work with Falconsat-3 right out of the box? I believe I used my TS-2000 to work GO-32 with it's internal modem many years ago and I'm pretty sure it was plug-n-play. It's a shame that the TS-2K is no longer being offered. Sorry I sold mine. Tony On 10/21/2020 6:15 PM, Brian Wilkins KO4AQF wrote: > I have used the D72A and KK4YEL has used the 710. There’s an upcoming > AMSAT Journal Article this month on how to use the D72A. Not sure if > you have one of these radios but it’s a viable alternative > > On Wed, Oct 21, 2020 at 10:36 AM Mark L. Hammond via AMSAT-BB > <amsat-bb@amsat.org <mailto:amsat-bb@amsat.org> <mailto:amsat-bb@amsat.org <mailto:amsat-bb@amsat.org>>> wrote: > > Hi Tony, > > Quite a few of us have tried. Briefly, NO. We can receive at > 9600 baud > sort of (quick explanation follows), but cannot get the radio to > transmit > at 9600. > > I don't think I was ever able to use the audio out of the radio > (FM-D, etc) > into a real TNC and decode it. Not sure anyone has... > > To receive--use the IF via USB audio; use a program like SDR# with > FM (all > filters off, 10-12kHz wide), feed that audio into hs_soundmodem > that then > connects to PacSat Ground Station software. > > Sadly, the fplks at iCOM are not responding to the request several > of us > have made to figure out a way to get to work at 9600. Surely it's > doable---but iCOM doesn't seem to think it's worth the > time/investment... > > Mark L. Hammond [N8MH] > AMSAT Director and Command Station > > > > On Wed, Oct 21, 2020 at 9:28 AM Tony via AMSAT-BB > <amsat-bb@amsat.org <mailto:amsat-bb@amsat.org> <mailto:amsat-bb@amsat.org <mailto:amsat-bb@amsat.org>>> > wrote: > > > All: > > > > Is anyone using the ICOM 9700 to work FalconSat-3 with either a > hardware > > or sound card modem? If so, can you please elaborate on your setup? > > > > The manual is a bit vague on 9600 baud operation. > > > > 73, Tony > > > > _______________________________________________ > > Sent via AMSAT-BB@amsat.org <mailto:AMSAT-BB@amsat.org> <mailto:AMSAT-BB@amsat.org <mailto:AMSAT-BB@amsat.org>>. > AMSAT-NA makes this open forum available > > to all interested persons worldwide without requiring > membership. Opinions > > expressed > > are solely those of the author, and do not reflect the official > views of > > AMSAT-NA. > > Not an AMSAT-NA member? Join now to support the amateur > satellite program! > > Subscription settings: > https://www.amsat.org/mailman/listinfo/amsat-bb > > > _______________________________________________ > Sent via AMSAT-BB@amsat.org <mailto:AMSAT-BB@amsat.org> <mailto:AMSAT-BB@amsat.org <mailto:AMSAT-BB@amsat.org>>. AMSAT-NA > makes this open forum available > to all interested persons worldwide without requiring membership. > Opinions expressed > are solely those of the author, and do not reflect the official > views of AMSAT-NA. > Not an AMSAT-NA member? Join now to support the amateur satellite > program! > Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb > > -- > Brian Wilkins > KO4AQF _______________________________________________ Sent via AMSAT-BB@amsat.org <mailto:AMSAT-BB@amsat.org>. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb-- Brian Wilkins KO4AQF