Jason's contact details are at http://www.planetary.org/about/staff/jason-davis.html A video about LightSail with TV's Bill Nye the Science Guy along with KI6EPH and KJ6KSF can be seen at
http://amsat-uk.org/2015/05/20/lightsail-1-launch/
73 Trevor M5AKA ---- AMSAT-UK http://amsat-uk.org/ Twitter https://twitter.com/AmsatUK Facebook https://facebook.com/AmsatUK ----
On Wednesday, 20 May 2015, 9:19, Wouter Weggelaar wouterweg@gmail.com wrote:
Hi Stefan,
greg, w9gb ... send queries to jason davis or follow him on Twitter.
Have you also sent the query to Jason, and if he responded, can you let us know the outcome? I do not have twitter, and have not found any E-mail address in the post.
Wouter PA3WEG
On Wed, May 20, 2015 at 4:00 AM, Stefan Wagener wageners@gmail.com wrote:
Hi Greg,
Is the telemetry decoding software or code available for us to see/decode the data and monitor the satellite? That would greatly help in getting amateur radio operator support worldwide.
Good luck and 73,
Stefan, VE4NSA
On Wed, May 20, 2015 at 5:13 AM, Gregory Beat w9gb@icloud.com wrote:
The Planetary Society : LightSail Mission Blog, by Jason Davis, Twitter: @jasonrdavis
http://www.planetary.org/blogs/jason-davis/2015/20150518-lightsail-first-day...
We’re now able to release a timeline of events for LightSail’s first day in space.
The chart on LightSail mission Page assumes a liftoff of 10:45 a.m. EDT, (14:45 UTC) at the start of the four-hour launch period. The actual
window
has not yet been released.
We aren't sure when we'll hear from LightSail, but the first possible opportunity comes three hours, 14 minutes after liftoff (17:40 UTC).
If you’re a member of the amateur radio community, YOU CAN HELP ! Our radio frequency is 437.435 MHz. Email me any data you collect from LightSail, including screenshots of the radio signal if you have them.
I'll
pass the information on to our engineering team, and we'll recognize your contribution on our blog.
LightSail's automated telemetry chirps start after antenna deployment and continue throughout the mission. We’ll update our Mission Control Center
to
show the spacecraft’s current position, including pass predictions for
your
device’s current location (courtesy of N2YO.com).
#LightSail telemetry info from our engineering team:
437.435 MHz, Encoding: FSK, Baud: 9600 bps, AX.25
===== greg, w9gb ... send queries to jason davis or follow him on Twitter.
Sent from iPad Air _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership.
Opinions
expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite
program!
Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
_______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb