----- Original Message ----- From: "Anthony Monteiro" aa2tx@comcast.net To: "Phil" phillor@telstra.com; "Amsat-Bb" amsat-bb@amsat.org Sent: Friday, February 01, 2008 1:17 PM Subject: Re: [amsat-bb] Re: Satellite tracking programming ideas
At 10:57 PM 1/30/2008, Phil wrote:
<cut>
If I read the frequency once per second while spinning the tuning knob, occasionally I'll see an incorrect value. That same value persists until the knob is moved again. I can see the problem but not the answer.
Thanks again for the replies Tony and Nate.
Problem solved. It wasn't hardware but instead a bug, caused by the use of a signed char that sometimes caused a frequency calculation error.
I've been tracking AO-40's ghost for the past few weeks and I'm enthused again and look forward to making contact once again through a real satellite.
Regards, Phil.