I had a rotor once I do not remember who made it. But it was super nice because it had 400 degrees of rotation.
the stops were both sides of north by 45 degrees. don't remember who made it tho but that was NICE!!
Joe WB9SBD
The Original Rolling Ball Clock Idle Tyme Idle-Tyme.com http://www.idle-tyme.com
On 9/4/2011 12:49 PM, Greg D. wrote:
It will not be a problem. The key is to have the rotor's motor rotated to zero degrees before securing the clamps for the North-facing antenna.
You will only run into the stop if you try to pass through North from one side to the other, requiring you to swing fully around. That is why some set up their rotors to have the motor's zero degree setting aimed South, if most of the things they aim at are + / - North. That's not the case here, so I use the regular Zero = North arrangement. (Or invest in a rotor that can swing through 450 degrees...)
Greg KO6TH
Date: Sun, 4 Sep 2011 13:15:29 -0400 From: rhyolite@nettally.com To: amsat-bb@amsat.org Subject: [amsat-bb] Re: Adjusting true north for azimuth rotator.
Thanks to all who replied. When I last installed the rotator, I had a free standing tower and I pored the foundation and mounting bolts such that one leg was aligned true north.
In this new case, the tower face will have to be against a wall and that wall as I mentioned is +28 degrees from north. The consensus is that the azimuth rotator case can be oriented in any direction and the antenna's (and elevation rotator separation kit) be clamped to the top of the rotator aligned to true north. What I can't sort out is if I will hit a stop if I rotate full CW or CCW, before reaching the south direction. The comments seem to imply I won't.
Thanks.
-- Joe Leikhim
Leikhim and Associates Communications Consultants Oviedo, Florida
www.Leikhim.com
JLeikhim@Leikhim.com
407-982-0446
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb