Asked myself the same question a few days ago.
Shouldn't damage the rotator if you use the control box as a drive unit, rather than as an indicator (will be wrong, as the g-5400 is a 360 adnd g5500 is 450). Use a K3NG arduino rotator connected to the aux plug on back as a controller. Can use relays or transistors to key the aux control lines.
Do note that K3NG's code needs to be cofigured correctly: I.E. total rotation and center.
Norm n3ykf
On Thu, Apr 27, 2017 at 1:03 PM, Vincenzo Mone vimone@alice.it wrote:
Hi folks, I own the Yaesu G-5400 rotators ( Azimuth and Elevation ) and the Yaesu G-5500 complete with the Control Boxes. As I have problems with both the G-5500 Azimuth and Elevation Rotors and as I still have both the G-5400 ones, I would like to know if I can use both the G-5400B rotators with the G-5500 Control Box or I need by force the original ones? I saw that the difference between the two Control Box is the Azimuth Display, that the G-5400B one has on the left and on the right side of the display: 180 S, while the G-5500 one has on the left side of the display: 0 N and on the right side of the display 90 E. Please anybody can help me to avoid any damage? Any help will be really appreciated. Thanks in advance
73's de Enzo IK8OZV
************************************ ****** GSM +39 328 7244294 ***** ***** SMS +39 328 7244294 ***** ************************************
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb