Thanks guys. That is why I am asking. After this past weekend of operating and a few conversations I noticed something wasn't right. Makes total sense to adjust the higher frequency.
Keep learning every day and every pass!
Chad
Sent from my iPhone
On Dec 29, 2016, at 10:37 AM, Paul Stoetzer n8hm@arrl.net wrote:
Always tune the highest of the tune frequencies.
On Mode B, tune your transmitter and maintain a constant downlink and on Mode J, tune your receiver and maintain a constant uplink.
This keeps you from drifting too far and possibly into QSOs of people using computer control.
Much to my dismay, some literature, including the most recent edition of the ARRL Operating Manual still include the outdated suggestion to always tune your transmitter.
73,
Paul, N8HM
On Thu, Dec 29, 2016 at 11:10 Chad Phillips chad.kg0mw@gmail.com wrote: I first got on the sats back on AO-13. Seem to me back then when we operated linear satellites (FO-29, RS’s etc) we found ourselves on the receive passband and as the doppler changed we adjusted our transmit freq to make sure we stayed on the receive frequency.
Of course things have changed since then and many use some sort of satellite tracking software to control the doppler adjustments on the radio. But when you are operating portable what is the proper procedure on the linear sats?
Thanks,
Chad
kg0mw/en13
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership. Opinions expressed
are solely those of the author, and do not reflect the official views of AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb