I use PDA's Logic for my logging. When I did a bunch of grid boundary dxpeditions way back and finally uploaded them to lotw I had to create a location for grid group (el29, el19) and it handled it just fine with lotw. in the list of where I operated from I would label it xxx county el29/el19 so that if I ever operate from there again, it is already built and ready to go. if I am the receiving station, I think I have to go into the adif file before transmission and change the grid to el29,el19 and lotw handles the rest. since you are only going to work someone once on a boundary, it is not a problem to change it in the adif file. if you were working hundreds of people, that would be a pain.
73...bruce
________________________________ From: Alan wa4sca@gmail.com To: AMSAT-BB amsat-bb@amsat.org Sent: Thursday, September 18, 2014 10:58 AM Subject: Re: [amsat-bb] lotw
Many people use a program such as DXKeeper, HRD Logbook, Log4OM, etc as a front end for LoTW. I don't know the answer, but I wonder if there might be some subtle incompatibility with the way they pass information?
73s,
Alan WA4SCA
<-----Original Message----- <From: amsat-bb-bounces@amsat.org [mailto:amsat-bb-bounces@amsat.org] On Behalf Of Paul Stoetzer <Sent: Thursday, September 18, 2014 9:48 AM <To: Steve May <Cc: amsat-bb@amsat.org <Subject: Re: [amsat-bb] lotw < <There is no need to do this for grid boundaries. < <The only reason you would enter separate QSOs for a single QSO is if <the station was on county, state, or national boundaries as LoTW <doesn't support multiple counties, states, or DXCCs in one QSO. Grid <lines and corners are supported. < <For example, this is my confirmation from CO6CBF for a QSO from the <FL00/FL10 line. < <Worked CO6CBF <DXCC CUBA (70) <CQ Zone 8 <ITU Zone 11 <Grid FL00,FL10 < <73, < <Paul, N8HM < <On Thu, Sep 18, 2014 at 10:10 AM, Steve May steve.w5iem@gmail.com wrote: <> I usually just do two entries 1 minute apart with the different grid <> squares. <> <> Steve, W5IEM <> On Sep 18, 2014 10:06 AM, w6gmt@bak.rr.com wrote: <> <>> <>> <>> <>> I worked K8YSE on FO-29 last night (Thanks John) Posted the contacts to <>> LoTW only to have one of them rejected as a dup. How do others work around <>> this ? usually I only need one of the grids but in this case need both. <>> they would be # 206 and 207. I would ask the LoTW staff but the E-mail site <>> for ARRL.org is still down. <>> 73 <>> Brock <>> W6GMT <>> BROCK THOMSEN <>> PO BOX 222 <>> MARCELL MN 56657 <>> EN37EN <>> _______________________________________________ <>> Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available <>> to all interested persons worldwide without requiring membership. Opinions <>> expressed <>> are solely those of the author, and do not reflect the official views of <>> AMSAT-NA. <>> Not an AMSAT-NA member? Join now to support the amateur satellite program! <>> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb <>> <> _______________________________________________ <> Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available <> to all interested persons worldwide without requiring membership. Opinions expressed <> are solely those of the author, and do not reflect the official views of AMSAT-NA. <> Not an AMSAT-NA member? Join now to support the amateur satellite program! <> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb <_______________________________________________ <Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available <to all interested persons worldwide without requiring membership. Opinions expressed <are solely those of the author, and do not reflect the official views of AMSAT-NA. <Not an AMSAT-NA member? Join now to support the amateur satellite program! <Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
_______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb