I also used the data restore utility *before* running 12.8b. Then when I ran 12.8b, it showed as a registered copy (with my name and call).
I also caught Mark's comment and copied the 12.8b version of PROGRAM.SQF over the backup copy from 12.8a. The result is the data backup utility and time utilities are available from the Program menu.
73, Steve N9IP -- -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Mark Hammond Sent: Friday, October 21, 2011 4:13 PM To: Wayne Estes; [email protected] Subject: [amsat-bb] Re: SatPC32 version 12.8b is released
I used data restore and it used the backup info! No need to reenter here going from a to b.
-----Original Message----- From: Wayne Estes [email protected] Sent: October 21, 2011 3:24 PM To: [email protected] Subject: [amsat-bb] Re: SatPC32 version 12.8b is released
WA4SCA wrote:
You can run the update on a registered version, and it will be registered. A good idea to put the registration info in a safe place, just in case, though Martha can generate it for you.
W9AE replies:
I had to re-enter my registration code when upgrading from 12.8a to 12.8b.
Previous SatPC32 upgrades did not require the registration code to be re-entered.
Wayne Estes W9AE Oakland, Oregon, USA, CN83ik
_______________________________________________ Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
_______________________________________________ Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb