28 Sep
2018
28 Sep
'18
12:45 a.m.
On 9/27/18, Greg D ko6th.greg@gmail.com wrote:
In the radio control window, you need to click the "L" button to link the Tx and Rx frequencies, so that changing one moves the other a corresponding amount. Also be sure the the satellite mode is correct, i.e. set for a transponder not a beacon.
<snip>
The uplink and downlink frequencies can also be adjusted independently by clicking on the triangles above and below each digit in the display. That comes in handy for fine-tuning the radio if there's a bit of drift or if both stations don't quite hear each other.
73s
Bernhard VA6BMJ @ DO33FL