I use 9913F7. Works great.
There are a number of alternatives. Some of the stuff is great for a year or two, then the jacket degrades. Brand names USUALLY get a reliable product.
Hope to hear you on the air.
Norm n3ykf On Mon, Aug 27, 2018 at 2:26 AM David J. Schmocker kj9idave@charter.net wrote:
Hello: New to satellite communication I plan to construct a fixed station to work satellites.
I am looking to identify best type of coaxial cable to run from my VHF/UHF antennas around az/el rotors to the preamplifier (located on the fixed mast/support).
Most important coaxial cable requirements include:
Highly Flexible (in upper midwest climate: temperatures range from 15 deg to +100 degrees F) in Repeated (continuous) flexing Low Loss (while super flex Heliax would be my preference, it¹s not designed for repeated flexing this application sees Full shielding (preserve S/N and overall system noise figure).
I can compare the loss values from manufacturer data sheets; my main interest here is to learn what type of cable has withstood the repeated (continuous) flexing required to work satellites?
What cable type do you recommend based on your experience? Thank you 73,
Heliax Superflex? Times Microwave LMR-600UF? EcoFlex 15 Plus? Belden 9913Flex? Something else?
David J. Schmocker, KJ9I
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb