I feel your pain Scotty, I have a similar problem with my 9100, LVB, and SatPC32. In my case the LVB would show a memory error and I would lose calibration. Only way to fix would be a full re-calibration. This is a real pain to go through during a pass so I just remember to turn on the LVB, then the 9100, then bring up SatPC32. I know of no other way around this....
73 Jeff kb2m
-----Original Message----- From: Scott Smith Sent: Sunday, June 21, 2015 4:00 PM To: Amsat Subject: [amsat-bb] SatPC32 actinh wierd
Hi, I fired up my SatPC32 in the wrong order from the way I usually do it, I usually turn on radio and my LVB tracker first then fire up the computer. The LVB works fine,but I got a message “could not open Com3 and to check if It was available” this is weird as this laptop is dedicated only for satellite use, and I have not changed anything. I use a Kenwwod IF232r between my computer and my TS790a radio. I opened the device manager and it says for the FT232r USB UART “the drivers for this device are not installed (Code 28). I tried to downoard the driver from ZLP and it still does not work?, any ideas? Tnx in advance. 73 de VE6ITV Scott _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb