Jeff, You can remotely switch the radio between RX and TX (PTT). In the SatPC32 main window double click on the Statusbar at the bottom of the window. Three TX/RX "buttons" will appear in the corners of the map. If the remote link fails while the radio is in TX the program will automatically switch it back to RX after a selectable period (menu "Options"). Default is 60 seconds. If you set the value to 0 the functions is disabled. 73s, Erich, DK1TB
Am 14.07.2015 um 16:24 schrieb kb2m@arrl.net:
Is anyone using TeamViewer (or any other remote PC control s/w) to control their sat station remotely? I'm able to run SatPC32 remotely to control my Yaesu rotor, LVBTracker, 9100 sat system. Thanks to Erich I can view the actual and target az el position of the rotor with a version of serverSDX. I'm looking for a s/w program to remotely control radio functions like PTT, and also handle rx/tx audio. I will be heading back to Florida for the winter in October so I have plenty of time to set this up. I also have a small shore home that is 60 miles away to test from as I go down there every week for a few days. Any suggestions from experienced remote sat ops before I start looking?
73 Jeff kb2m
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb