I would double check your computer's time to make sure it is correctly synced to the network. Next, I would look at your station altitude in the observer settings. Remember that this is the elevation of your station above mean sea level in meters, not in feet! -- Mark D. Johns, KØJM AMSAT Ambassador & News Service Editor Brooklyn Park, MN USA EN35hd ----------------------------------------------- "Heaven goes by favor; if it went by merit, you would stay out and your dog would go in." ---Mark Twain
On Fri, Jul 2, 2021 at 9:40 AM crohtun via AMSAT-BB amsat-bb@amsat.org wrote:
So… using nasabare for 7/2 didn’t help. The ISS was still about 10kHz above where SatPC32 was tuning the IC 9700. Had to enable the VFO and manually tune up to it and then follow it back down the band. Also still getting good signals after supposed LOS, down to -5 to -8 degrees. Had SatSat in front of me on the iPad watching the ISS az, el, range, altitude and Doppler at 100MHz, AOS/LOS times. It was all very close to what SatPC32 was displaying. Yet SatPC32 did not put the rig where the ISS links were. Only seems to affect ISS as far as I can tell. I really don’t get it.
Ray
Sent from the all new AOL app for iOS https://apps.apple.com/us/app/aol-news-email-weather-video/id646100661
Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/
View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/amsat-bb@amsat.org To unsubscribe send an email to amsat-bb-leave(a)amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org