I may missing something obvious, but when tuning the IC-910 on FM satellites I noticed that under normal SQF files for AO-51, as an example, both uplink and downlink do doppler adjustment. In the case of FM or AO-51 in this case, I want the uplink to stay the same and only the downlink to doppler adjust. I also find that if I select the mode of downlink only, when the tracking and doppler starts the mode changes to downlink & uplink and then blanks out so you can no longer change it.
I have found a way to prevent this but it means manually setting the uplink frequency. If I edit DOPPLER.SQF to have downlink only and an upplink of 0, it prevents the uplink from adjusting. However, I had to manually set the uplink to the frequency I wanted. This works, but I feel I'm missing something simple.
Also, I've gotten use to using the IC-910 for 2-mtr band A and 70cm band B and only band A transmits. Unable to do this in SATPC. However, no big deal as the "Satellite" mode all works well, except the doppler adjustment of the uplink.
Anyone with an idea what I'm missing here? This is the first chance to really use SATPC as I have been normally doing manual tracking and the "AFC" on the downlink which works quite well on the IC-910.
Regards,
Reid, W4UPD AMSAT: 17002